Webinar: Building a Big Business in Small Commercial Solar

What is UL 2703A?

The QuickMount HUG™ and BUG™ attachments—that use our UltraGrip seal technology—are listed to UL 2703A, a new standard by UL for Flashing Devices and Systems for Rooftop-Mounted Photovoltaics. The BUG™ Conduit Mount is also listed to UL 2239 for supporting conduit.

The requirements of UL 2703A cover flashing materials, devices, and systems intended to provide resistance to water penetration to the interior of the building, in situations where photovoltaic rack mounting systems penetrate roof covering systems. These products are intended to be installed in accordance with either the International Building Code (IBC) or the International Residential Code (IRC), and the installation instructions.

These requirements do not address the ability of flashing materials, devices, and systems to withstand the structural wind forces of tornados, cyclones, or hurricanes. These requirements also do not cover: performance during exposure to fire, structural attachments for the rack mounting system, structural performance of roof attachments for above roof mounting of photovoltaic (PV) modules and panels, and the mechanical and structural requirements of the IBC or IRC.

If you want to try a permit pack for free, use the promo code “FREE_PACK_2023”.

You can access the permit pack tool by clicking on the orange “Permit Pack” button on the “My Projects” page.

You can also get started with this direct link here: https://base.ironridge.com/permit_packs/new

If you have any issues, please contact IronRidge Tech Support at 1-800-227-9523 ext 1 or email support@ironridge.com.

CLICK ON THIS LINK TO REGISTER FOR INTERSOLAR 2023

Then, do the following on that page:

1. Select the “Attendee” button.
2. Fill out the form with all contact details.
3. Enter this promo code at the bottom: ISNA2330874
4. After you have completed the profile section, you will be directed to the registration options. This section is very important because our code will only cover the cost on an exhibit hall pass or 20% a conference hall pass ($760). If you would like to attend any other workshops, training, or networking event you will have to cover it. Also, you don’t have to enter the promo code again because you entered it in the contact information section.
5. Once you have entered and confirmed all info, you will registration confirmation.